Installation and set-up

Step 1:  remove the equipment from the box;

Step 2: plug the power supply into device;

Step 3: after, plug-in into the outlet;

Step 4: connect the internet cable that exists in their home into the network input of the router, and it is identified by “Internet” * View image 1;

Step 5: after that, connect the router in their computer, utilizing an internet cable on any ports available in the router;​ * View image 1;

Step 6: look for in the router, if it has any ip address, identified as 10.0.0.1, for example, overall it is under the equipment, on a label;

Step 7: enter the IP address into a web browser (Chrome, Firefox, Edge, or another) and wait for the installation assistant window to open;

Step 8: at this point, you are ready to configure your router using the installation assistant. * View image 2;

Step 9: in the configuration window, create an administrator password, as requested.* View Image 3;

Step 10: next, in the quick setup, choose the operating mode (Router, Access Point, or Repeater) according to your needs (available in the section "use cases and product features"), as shown in the image 4;

Step 11:  if any IP configuration appears, leave it set to automatic by default and proceed.* View image 5;

Step 12:  set the network name and a password in the basic configuration, then click the confirmation button, as shown in the image 6;

Step 13: test the new networks created using a smartphone or computer, as you prefer;

Step 14: from here, the defined network is ready to be used;